Application instructions

Tribotechnical composition ArmActiv® Мото 2

Volume - 50 ml.

Tribotechnical composition ArmActiv® Moto 2 is designed to treat any kinds of 2-stroke engines of motor vehicles to protect against wear, reduce friction and optimize working processes.

Blends with any type of oil. It is added to the oil before mixing with fuel, or into fuel.

Sequensing:

1. Bring the engine to operating temperature (normal operation);
2. Stop the engine;
3. Shake a bottle of ArmActiv® Moto 2;
4. Breaking the tamper control, open the cover and pour the contents into the oil filler neck of the engine. If the oil system is separate, pour the composition in the fuel tank;
5. Close oil filler cap with stopper;
6. Start the engine and continue driving in normal mode, providing a run of at least 5 km or 1 hour of operation.

Provides reliable protection against wear on carbon nanoarmination technology.

Properties:

• Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
• Antifriction (reduces friction loss);
• Anti-wear (significantly reduces the wear of friction pairs).

Effect:

• Increase the engine life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs;
• Reduce the fuel consumption up to 10%;
• Complete absence of wear at the time of "cold start";
• Significantly reduce vibration and hence noise;
• Reduce smoke;
• Optimize the gaps;
• Remove deposits on the valves and in the combustion chamber.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of motor oils.

Attention!

1. The engine must be in good condition.
2. It is not allowed to pour the composition into the cold engine.

Storage conditions:

-20⁰С - +70⁰С (-4⁰F - +158⁰F).

Shelf life: 5 years from the date of production (indicated on the vial).