ArmActiv auto Engine

Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

Volume – 90 ml, 190ml.

Blends with any type of oil.

Composition: Base oil + carbon compounds.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads)
  • Antifriction (reduces friction loss)
  • Anti-wear (significantly reduces the wear of friction pairs)

Effect

  • Increase the engine life up to 5 times due to formation of a tribopolymer layer on the surface of friction
  • Reduce the fuel consumption up to 10%
  • Complete absence of wear at the time of "cold start"
  • Significantly reduce vibration and hence noise
  • Reduce the toxicity of exhaust gases due to more complete combustion of fuel
  • Optimization of gaps

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of motor oils.

Application (go to the instructions page)

Before use, shake the bottle with the composition intensively.

The temperature of the composition should be approx. + 200С (+ 680F).

  1. Pour the composition into the engine heated to operating temperature
  2. Fill the composition in the oil filler neck of the engine
  3. After pouring the composition into the engine, start moving in the normal mode, providing a run of 15 - 25 km (10 - 15 miles)
  4. The dosage of the composition and recommendations are given in the instructions
  5. Strictly follow the instructions for use

Attention!

  1. The engine must be in good condition;
  2. It is not allowed to pour the composition into the cold engine.

Packaging:

The vial volume is 90 ml, 190ml.

The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С (-40F - +1580F).

Shelf life: 5 years from the date of production (indicated on the vial).

ArmActiv auto Trax

Tribotechnical composition is designed to treat transmissions (reduction gearboxes, bridges) to protect against wear, reduce friction and optimize work processes.

Volume – 50 ml.

Blends with any type of oil.

Composition: Mineral composition + carbon compounds + active substances, base oil.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties:

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
  • Antifriction (reduces friction loss);
  • Anti-wear (significantly reduces the wear of friction pairs).

Effect:

  • Increase the transmission parts life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs (carbon nanoreinforcement);
  • Increase the run-out at neutral transmission;
  • Reduce the fuel consumption up to 10%;
  • Significantly reduce vibration and hence noise;
  • Reduce the temperature;
  • Optimize the gaps.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of transmission oils. Does not have a negative effect on rubber products.

Application (go to the instructions page)

Before use, shake the bottle with the composition intensively.

The temperature of the composition should be approx. + 200С.

  1. Pour the composition into the transmission heated to operating temperature;
  2. Fill the composition in the oil filler neck;
  3. After pouring the composition, start moving in the normal mode, providing a run of 15 - 25 km / 5 engine hour;
  4. The dosage of the composition and recommendations are given in the instructions;
  5. The dosage of the composition and recommendations are given in the instructions;
  6. Strictly follow the instructions for use.

Attention!

  1. The transmission must be in good condition.
  2. To achieve the greatest effect, it is recommended to perform simultaneous treatment of gearboxes, reduction gearboxes and bridges.

Packaging:

The vial volume is 50 ml. The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С.

Shelf life: 5 years from the date of production (indicated on the vial).

ArmActiv auto Gear

Tribotechnical composition is designed to treat mechanical gearboxes to protect against wear, reduce friction and optimize work processes.

Volume – 50 ml.

Blends with any type of oil.

Composition: Base oil + carbon compounds.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties:

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads)
  • Antifriction (reduces friction loss)
  • Anti-wear (significantly reduces the wear of friction pairs)

Effect:

  • Increase gearbox parts life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs (carbon nanoreinforcement)
  • Reduce the fuel consumption up to 10%
  • Significantly reduce vibration, and hence noise
  • Improves the smoothness of the gearshifting
  • Increases the coast-to-neutral.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of transmission oils. Does not have a negative effect on rubber products.

Application (go to the instructions page)

Before use, shake the vial with the composition intensively.

The temperature of the composition should be approx. + 200С (+ 680F).

  1. Pour the composition into the gearbox heated to operating temperature;
  2. Fill the composition in the oil filler neck of the gearbox;
  3. After pouring the composition into the gearbox, start moving in the normal mode, providing a run of 15 - 25 km (10-15 miles);
  4. The dosage of the composition and recommendations are given in the instructions;
  5. Strictly follow the instructions for use.

Attention!

  1. The gearbox must be in good condition.
  2. To achieve the greatest effect, it is recommended to perform simultaneous treatment of gearboxes, reduction gearboxes and bridges.

Packaging:

The vial volume is 50 ml. The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С (-40F - +1580F).

Shelf life: 5 years from the date of production (indicated on the vial).

ArmActiv auto Gear A

Tribotechnical composition is designed for treating automatic gearboxes, as well as transmissions using ATF oils, to protect against wear, reduce friction and optimize work processes.

Volume - 50 ml.

Blends with all types of ATF oils.

Composition: Mineral composition + carbon compounds + active substances, ATF base oil.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties:

  • Anti-scuffing (prevents seizing and scuffing of rubbing surface sunder high loads);
  • Antifriction (reduces friction loss);
  • Anti-wear (significantly reduces the wear of friction pairs).

Effect:

  • Increase the life of the components of gearbox up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs (carbon nanoreinforcement);
  • Reduce of fuel consumption up to 10%;
  • Significantly reduce vibration and hence noise;
  • Improves the smoothness of the gearshifting;
  • Optimizes chain tension in variators by optimizing cone geometry;
  • Prevents chain slippage in variators.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of transmission oils.

Does not have a negative effect on rubber products.

Application (go to the instructions page)

Before use, shake the bottle with the composition intensively.

The temperature of the composition should be approx. + 200С.

  1. Pour the composition into the gearbox heated to operating temperature;
  2. Fill the composition in the oil filler neck of the gearbox;
  3. After pouring the composition into the gearbox, start moving in the normal mode, providing a run of 15 - 25 km / 5 engine hour;
  4. The dosage of the composition and recommendations are given in the instructions;
  5. Strictly follow the instructions for use.

Attention!

  1. The gearbox must be in good condition.
  2. To achieve the greatest effect, it is recommended to perform simultaneous treatment of gearboxes, reduction gearboxes and bridges.

Packaging:

The vial volume is 50 ml. The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С.

Shelf life: 5 years from the date of production (indicated on the vial).

Copyright © 2017 NPTK «ResTech» +7 812 984-8494 info@armactiv.ru
All rights reserved