ArmActiv for motobikes

ArmActiv Moto 2

Tribotechnical composition is designed to treat any kinds of 2-stroke engines of motor vehicles to protect against wear, reduce friction and optimize working processes.

Volume – 50 ml.

Blends with any type of oil. It is added to the oil before mixing with fuel, or into fuel.

Composition: Mineral composition + carbon compounds + active substances, base oil.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties:

• Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
• Antifriction (reduces friction loss);
• Anti-wear (significantly reduces the wear of friction pairs) .

Effect:

• Increase the engine life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs;
• Reduce the fuel consumption up to 10%;
• Complete absence of wear at the time of "cold start";
• Significantly reduce vibration and hence noise;
• Reduce smoke;
• Optimize the gaps;
• Remove deposits on the valves and in the combustion chamber.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of motor oils.

Application (go to the instructions page)

Before use, shake the bottle with the composition intensively.

The temperature of the composition should be approx. + 20⁰С.

1. Pour the composition into the engine heated to operating temperature;
2. Pour the composition into the oil before mixing with fuel or directly into fuel;
3. After pouring the composition into the engine, start the movement / work in the normal mode, providing a run of 15 - 25 km / 1-2 hours;
4. The dosage of the composition and recommendations are given in the instructions;
5. Strictly follow the instructions for use.

Attention!

1. The engine must be in good condition.
2. It is not allowed to pour the composition into the cold engine.

Packaging:

The bottle volume is 50 ml. The lid provides tightness and control of the first opening.

Storage conditions: -20⁰С - +70⁰С.

Shelf life: 5 years from the date of production (indicated on the vial).